ADVANCED THERMAL PROTECTION

PRE-POTTED JUNCTION BOX

GXP01 & GXP02 junction box adopts an innovative sub-bin structure that separates the bus junction box from the diode box. Pre-filled with high-grade thermal conductive glue and designed with a suspended diode chamber to prevent hot spots and safeguard the solar module backsheet.

1500V DC Rated Voltage
IP68 Ingress Protection
Pre-Filled Thermal Glue
GXP01 • GXP02 Series
GenX Pre-Potted Junction Box GXP01 GXP02 Front View
IEC Certified RoHS Compliant TUV Certified IEC Certified RoHS Compliant TUV Certified
IEC Certified RoHS Compliant TUV Certified IEC Certified RoHS Compliant TUV Certified
INNOVATIVE ARCHITECTURE

Dual Sub-Bin Design for Maximum Backsheet Safety

The GXP01 & GXP02 Pre-Potted Junction Box isolates the diode heat zone from the electrical bus chamber, preventing localized thermal stress on the module backplate.

Isolated Diode Chamber & Suspended Base Engineering

The GXP01/GXP02 separates the bus connection area from the high-temperature diode core. By suspending the bottom of the diode chamber, heat is directed away from the panel backsheet, while factory pre-filled heat-transfer glue accelerates natural thermal dispersion without on-site potting mess.

Pre-Potted Factory Filled Thermal Glue
Suspended Base Zero Direct Module Stress

Plug & Play Rapid Installation

Engineered for effortless mounting with a streamlined plug-and-play profile that minimizes labor time on PV production lines.

Suspended Diode Chamber

The bottom of the diode chamber is elevated and suspended to eliminate direct thermal contact and dramatically reduce thermal stress on the module back.

Dual Sub-Bin Architecture

Separates the active diode section from the conductive busbar zone, maximizing airflow and thermal dissipation efficiency.

Pre-Filled Thermal Potting

Leaves the factory pre-filled with specialized heat-transfer adhesive, speeding thermal conduction and avoiding on-site potting inconsistency.

Enhanced Backsheet Gripping

Engineered base geometry creates tight structural adhesion with the panel backsheet, ensuring long-term mechanical stability.

IP68 & 1500V DC Certified

Tested to withstand heavy submersion, dust storms, high impulse voltages (20 KV), and extreme temperatures from -40°C to +85°C.

TECHNICAL SPECIFICATIONS

Certified Engineering & Component Data

Factory certified data for GXP01 & GXP02 pre-potted junction boxes complying with IEC 62790:2020 international standards.

Rated Voltage
1500V DC
High-efficiency solar array standard
Rated Impulse Voltage
20 KV
Surge and transient suppression
Maximum Working Voltage
100V
Continuous safe operating capacity
Reverse Current
35A
String overcurrent protection
Protection Class
Class II
Application Class A certified
Ingress Protection
IP68
Complete dust and water immersion barrier
Operating Temperature
-40°C to +85°C
Tested across severe climatic cycles
Housing RTI & Flammability
110°C / UL-94 V0-5VB
Top-tier fire security rating
Diode Configuration
3 × 30A / 45V
Thermal adhesive potted diode bay
Connecting Cable
H1Z2Z2-K 4mm²
≥1.5 KV DC certified (EN 50618)
Cable Outer Diameter
6.2mm ± 0.2mm
Precision insulated cross-section
Contact Resistance
≤ 3 mΩ
Negligible power transmission loss
Busbar Termination
Clamping Type
Maximum busbar width up to 8mm
Contact Material
Copper Alloy, Tin Plated
Anti-oxidation and high conductivity
PV Connectors
1500V DC / 40A
Male & female standard IEC 62852
Governing Standard
IEC 62790:2020
International quality certification
Parameter Certified Specification Category
Rated System Voltage 1500V DC Electrical
Rated Impulse Voltage 20 KV Electrical
Maximum Working Voltage 100V Electrical
Reverse Current Rating 35A Electrical
Contact Resistance ≤ 3 mΩ Electrical
Protection Class Class II (Application Class A) Safety
Ingress Protection Degree IP68 (Waterproof & Dustproof) Environmental
Pollution Degree 1 Environmental
Operating Temperature Range -40°C to +85°C Environmental
RTI of Housing Material 110°C Material
Flammability Safety Class UL-94 V0, 5VB Safety
Diodes Configuration 3 Diodes (30A, 45V) in Pre-Potted Chamber Components
Connecting Solar Cable H1Z2Z2-K, 4.0 sq.mm, ≥1.5 KV DC (EN50618) Cable
Cable Overall Diameter 6.2mm ± 0.2mm Cable
Waterproofing Structure Engineered O-Ring Seal Mechanical
Width of Busbar Maximum 8mm Mechanical
Busbar Termination Clamping Type Mechanical
Contact Material High-Purity Copper Alloy, Tin Plated Material
Bonding Mode Silicon Glue / Structural Sealant Mechanical
PV Connectors (M & F) 1500V DC, 40A (IEC 62852) Components
Governing Standards IEC 62790:2020 Compliant Standards

Ready to Integrate GXP01 & GXP02?

Contact our engineering team for technical drawings, compatibility validation, or pre-potted sample testing.

Contact Engineering